MIG Guns & Accessories

• 60% Duty cycle at 500A CO2 or 350A Mixed Gas
• 3m cable
• Water cooled and compatible with Everlast PowerCool W375 & W400
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• easily adjusts stick out of electrode
• Takes AK36 Tips and Nozzle
• Requires AK500 Ceramic Diffusers & Tip Holder

• 60% Duty cycle at 500A CO2 or 350A Mixed Gas
• 5m cable
• Water cooled and compatible with Everlast PowerCool W375 & W400
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• easily adjusts stick out of electrode
• Takes AK36 Tips and Nozzle
• Requires AK500 Ceramic Diffusers & Tip Holder

• AK15 North MIG gun - 3m
• *requires NORTH GUN Tip Holder*
• Quick connect
• 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle
• Installed with a Blue STEEL Liner for wire sizes 0.6/0.8mm (.023/.030") (subject to change)
• 3m cable, air cooled-Euro quick connect compatible
• Ergonomically designed

• AK15 North MIG gun - 5m
• *requires NORTH GUN Tip Holder*
• Quick connect
• 180A CO2/150A Mixed CO2/Ar @ 60% Duty Cycle
• Installed with a Blue STEEL Liner for wire sizes 0.6/0.8mm (.023/.030") (subject to change)
• 5m cable, air cooled-Euro quick connect compatible
• Ergonomically designed

• 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
• *requires NORTH GUN Tip Holder*
• 3m cable, air cooled-Euro quick connect compatible
• Installed with a Red STEEL Liner for wire sizes 0.9/1.2mm (.035/.045") (subject to change)
• Ergonomically designed
• Twist off, slide on design easily adjusts stick out of electrode
• Compatible with Everlast MIG Units

• 250A CO2/220A Mixed CO2/Ar @ 60% Duty Cycle
• 5m cable, air cooled - Euro quick connect compatible
• Installed with a Red STEEL Liner for wire/tip sizes 0.9/1.2mm (.035/.045") (subject to change)
• Ergonomically designed-Twist off, slide on design
• easily adjusts stick out of electrode
• Compatible with Everlast MIG units

• 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
• 3m cable
• air cooled
• Installed with a Yellow STEEL Liner for wire/tip sizes 1.2/1.6mm (.045/.060") (subject to change)
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• Easily adjusts stick out of electrode

• 340A CO2/320A Mixed CO2/Ar @ 60% Duty Cycle
• *requires NORTH GUN Tip Holder*
• 5m cable
• air cooled
• Installed with a Yellow STEEL Liner for wire sizes 1.2/1.6mm (.045/.060") (subject to change)
• Euro quick connect compatible
• Ergonomically designed
• Twist off, slide on design
• Easily adjusts stick out of electrode

• PowerSpool Series
• For Power I-MIG welders and other brands with euro connectors
• 0.8mm (.030") Roller Equipped (Additional Wire Size require additional rollers) *Subject to change*
• GMAW (MIG)

• PowerSpool Series
• For Power MTS welders and other brands with euro connectors
• 0.8mm (.030") Roller Equipped (Additional Wire Size require additional rollers) *Subject to change*
• GMAW (MIG) 

• 300 amps CO2/270 amps mixed @ 60% duty cycle
• .030" - .045" wire diameter drive rolls available.
• Equipped with a 1.0mm (.040) roller. *Subject to change*
• Roll diameter max: 4" - AK36 series consumable
• Recommended for use with Power i-MIG 230i, 275S, 275P and PowerMTS 251Si
• Not for use with Power i-MIG 140E, 200, 210, MTS211Si
• Speed Control in Handle (Note: Speed Control does not work on Standard MIG Units, this feature will only work on MTS and Power I-MIG 230i and 275P)
• 6 Metre Whip.

• Ergonomic design for operator comfort
• Euro style quick connectors allow gun change out in seconds
• 6 month warranty
• AK36 Consumables
• Capable with: Power I-MIG 253DPi and Power I-MIG 275P ONLY.
• Equipped with a 1.2mm (.045") Roller *Subject to change*

• Work clamp with 3m cable
• 3/8" DINSE style (10-25)

• Work clamp with 3m cable
• 1/2" DINSE style (35-50)

Bronze Heavy Duty Work clamp with 8m cable and 1/2" DINSE style (35-50)

• 300 Amps Max Service Use
• Deluxe Copper Ground Clamp
• Heavy Spring Action
• Includes 25ft. cable
• Fits large DINSE 35 with 1/2" diameter pin connector
• Heavy Duty
• OEM Replacement for PowerTIG 210/255/325EXT

• Argon replacement OEM regulator for all Everlast TIG and TIG/PLASMA units
• Calibrated in CFH
• Also suitable for MIG use with mix gases